Low Impedance SMD Aluminum Electrolytic Capacitor 220uF 16V for Reflow soldering
Features
105℃ 2000hrs~5000hrs product
Mini size, low impedance
Suitable for Reflow soldering
Suitable for High density PCB surface mounting
Specifications
| Specifications |
| Category temperature range (℃) | -55 +105℃ |
| Capacitance tolerance (%) | ±20％( 120Hz/+20℃) |
| Leakage Current | 1≤ 0.01CV or 3uA which bigger (charge for 5 minutes at 20℃) CR: Nominal Capacitance(uF) UR: Rated voltages (V) |
| Dissipation Factor (tanδ) | See table of Characteristics |
| Low Temperature Characteristics | Rated voltage (V) | 6.3 | 10 | 16 | 25 | 35 | 50 | 63 | 80 | 100 |
| Z(-25℃)/Z(+20℃) | 4 | 3 | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
| Z(-40℃)/Z(+20℃) | 8 | 5 | 4 | 3 | 3 | 3 | 3 | 3 | 3 |
| Load Life | After application of rated voltage for the specified period of time 2000Hours/3000hrs/5000hrs at +105℃, returning to 20℃, the following specification shall be satisfied. |
| Promise load life: DxL≤6.3*5.7mm:2000H, 6.3x7.7., 8x6.5, 10x7.7:3000H, D≥8mm:5000H |
| Capacitance Change | Within ±30% of the initial value |
| Dissipation Factor | N o t more than 300% of the initial specified value |
| Leakage Current | N o t more than the initial specified value |
| Shelf Life | After storage for 1000 hours 105 ℃±2 ℃, return to 20 ℃, the capacitors shall meet the requirement of load life above |
| Resistance to Soldering Heat | After reflow soldering according to Reflow Soldering Temperature, restored at room temperature, they meet the following requirement. |
| Capacitance Change | Within ±10% of the initial value |
| Dissipation Factor | Not more than the initial specified value |
| Leakage Current | Not more than the initial specified value |
| Frequency coefficient of ripple current | Frequency | 50Hz | 120Hz | 1KHz | 10KHz≤ |
| Correction coefficient | 0.5 | 0.7 | 0.85 | 1.0 |
Dimensions
Nominal capacitance, rated voltage, rated ripple current and
case size table
| Rated voltage (V) | Capacitance(uF) ±20％ | Diameter (mm) | Height(mm) | Ripple Current(mArms) | ESR(Ω) | tanδ | Part Number |
| 16 | 220 | 6.3 | 7.7 | 280 | 0.36 | 0.18 | TMCE27-227M16VT |
FAQ Of Topmay Capacitor
1) Can I have a free sample to test ?
Yes, we could provide free samples to test and check quality. Freight cost is collected.
2) What is the lead time?
Sample needs about 7~10 working days prepared; mass production average time takes 15-20 working days
3) Do you have any MOQ limit?
Yes. But it depends on product. Normally MOQ is 2K~10Kpcs
4) How about price terms?
We do FOBSHENZHEN if order amount is more than 5000USD. Less than that, it is EXWSHENZHEN and we do not undertake local charge.
5) What information should I let you know if I want to get a quotation?
Basically for capacitor, it requires to know detailed capacitance and voltage. If you have more information, such as type, product photo for reference, you could kindly provide too.
Product Tags:
|
|
Low Impedance SMD Aluminum Electrolytic Capacitor 220uF 16V For Reflow Soldering Images
|
